China 3.17mm Molybdenum Spraying Wire 99.95% Pure Thermal Spray Molybdenum Wire

Molybdenum Spraying wire is used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc.
Molybdenum spraying wire is also sprayed onto machine parts such as bearing for repair purposes.
Materials: Pure molybdenum, Mo>99.95%, impurities <0.05%, each element content <0.01%
Appearance: Molybdenum spraying wire is covered with graphite. After removed graphite, it is metallic luster.
Molybdenum spraying wire Properties:
1. The weight of single wire is up to 20-25kg without any welded joint, which results in enhancing the efficiency and decreasing the operating costs.
2. Diameter: 3.175mm, 2.3mm-1.41mm
3. Tolerance: 3.175mm + / -0.025mm or + 0 / -0.05mm
2.3mm-1.45mm + / -0.02mm + 0 / -0.05mm
4. Tensile strength: >700-900N / mm2
5. Elongation: >20-5%

Pure Molybdenum Chemical Composition In %:
Brand
Mo Content
Maximum Content of Impurities
Total
Al
Si
C/Fe/Ti
Ni/O/Cr
Ca/Mg/Na
HLMo1
≥99.95
0.05
0.002
0.003
0.005
0.003
0.002
State of Finished Molybdenum Spraying Wires:
Sizesmm
Surface
Reel Weightkg
Packing
Φ3.17
Black
10~25
Self-coiling
Φ2.31
Black
10~25
Self-coiling
Φ1.60
Black
10~25
Self-coiling,or reel
Φ1.45
Black
10~25
Self-coiling,or reel